Personal Safety; Petrol Tool Use And Care - Hecht 8573 Originalbetriebsanleitung

• Stop the engine and disconnect the spark plug wire, make sure that all moving parts have come
EN to a complete stop:
- Whenever you leave the machine.
- Before refueling.
- Before checking, cleaning or working on the machine.
- After striking a foreign object. Inspect the machine for damage and make repairs
before restarting and operating the machine.
- If machine starts to vibrate abnormally (check immediately).
DE
• Inspect the air pressure in the tires prior to use and pay attention to sharp objects when using
this unit to prevent the tire from being pierced.
• It is necessary to make sure the machine is safely put out of operation and secured against
travelling when working on wheels. Repairs of tyres can only be performed by professionals
with appropriate assembly tools. Check regularly the air pressure in tyres.
• Operate this unit at suitable hours, not early in the morning or late at night, when people might
CS
be disturbed. Comply with times listed in local ordinances.
• Use only spare parts and components, which the manufacturer delivers and recommends.
• Do not attempt to repair the device yourself. Any work not listed in this manual MAY BE
PERFORMED ONLY BY AUTHORIZED SERVICE CENTRES.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a petrol tool. Do
SK
not use a power tool while you are tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power tools can cause you to lose control and may
result in serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask,
non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
PL
• Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left
attached to a rotating part of the machine may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of
the petrol tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

PETROL TOOL USE AND CARE

WARNING! Gasoline is highly flammable and explosive
• Store fuel in containers specifically designed for this purpose.
• Refuel outdoors only and do not smoke while refueling.
• Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol while
the engine is running or when the engine is hot.
• If petrol is spilled, do not attempt to start the engine but move the machine away from the area
of spillage and avoid creating any source of ignition until petrol vapors have dissipated.
• Replace all fuel tank and container caps securely.
• Do not operate the engine in a confined space where dangerous carbon monoxide can collect.
• Do not force the petrol tool. Use the correct petrol tool for your application. The correct petrol
tool will do the job better and safer at the rate for which it was designed.
• Do not use the petrol tool if the main switch does not work. Any petrol tool that cannot be
controlled with the switch is dangerous and must be repaired.
22 / 148