SICK LFP inox Betriebsanleitung Seite 95

LFP Inox
Index Name
(decimal)
74 QAType
75 QAFailCur-
rent
76 POLA
8014485/YE12/2014-08-20 © SICK AG • Level sensors • Germany • Subject to change without notice
8 IO-Link
Format Access
8-bit R/W
unsigned
8-bit R/W
unsigned
8-bit R/W
unsigned
Value
0 4 mA to Switchover, current/voltage
20 mA output
1 0 V to When this parameter is being
10 V read, the type that has most
recently been decided upon is al-
2 Auto ways read (0 or 1). Despite this,
Detect the decision is made again every
time the device is reset.
3 Auto V
4 Auto A
0 3.5 mA Determining fault current
1 21.5 mA This parameter has no function
in voltage mode
0 Normal Inversion of the analog output
1 Inverse
Normal:
QALow is at the 4 mA or 0 V
point and QAHigh describes
the 20 mA or 10 V point
Inverse:
QALow is at the 20 mA or
10 V point and QAHigh describes
the 4 mA or 0 V point
EN
Operating instructions
Description
95