Reference Conditions - Sick Lfp Inox Betriebsanleitung

EN
Operating instructions
Dielectric constant
Conductivity
Maximum level change
Inactive area at process connection
Inactive area at end of probe
With water under reference conditions.
1)
With parameterized container with water under reference conditions, otherwise 40 mm.
2)
Dependent on measuring mode (high speed < 400 ms, high accuracy < 2,800 ms)
3)
Dependent on configuration (maxCol - Maximum change of level)
4)
9.1 Features
Container with a diameter of
Minimum distance to built-in components
Distance from end of probe to tank bottom
Air humidity
Temperature
Pressure
Medium
Central installation of the sensor
Sensor parametrized to the container
98 8014485/YE12/2014-08-20 © SICK AG • Level sensors • Germany • Subject to change without notice
9 Technical data
≥ 5 for mono-probe
≥ 1.8 with coaxial tube
4)
2)
1)
No limitation
500 mm/s
25 mm
10 mm
1 m
> 300 mm
> 15 mm
65 % ± 20 %
+20°C ± 5°C
1013 mbar abs. ± 20 mbar
Wasser, DK = 80
l
l
LFP Inox