Maintenance; Returns; Disposal; Medium List - Sick Lfp Inox Betriebsanleitung

EN
Operating instructions

11 Maintenance

The LFP is maintenance-free. We recommend doing the following regularly:
Checking the probe for contamination
■
Checking the screw connections and plug-in connections
■

12 Returns

Declaration of no objection (contamination declaration in the event of service work)
Rinse off or clean removed devices before returning them in order to protect our employees and
the environment from dangers posed by residue from measured materials. Faulty devices can only
be examined when accompanied by a completed return form. A declaration of this type includes
information about all materials which have come into contact with the device, including those which
were used for testing purposes, operation, or cleaning. The return form is available at our Internet site
(www.sick.com).

13 Disposal

Dispose of device components and packaging materials in compliance with applicable country-specif-
ic waste treatment and disposal regulations of the region of use.

14 Medium list

This medium list on the next pages provides a guide to the DK values of liquids. Water-based liquids
always have a DK value of > 5, which allows LFP to be used easily. For DK values of < 5, a coaxial
tube or a metallic immersion tube/bypass is always required.
108 8014485/YE12/2014-08-20 © SICK AG • Level sensors • Germany • Subject to change without notice
11 Maintenance
LFP Inox