SICK LFP inox Betriebsanleitung Seite 87

LFP Inox
Parameter
Info
FrmVer
SerNo
CalSta
TagNam
SigQua
SigQa1
SigQa2
SigQa3
StEcho
PASSW
8014485/YE12/2014-08-20 © SICK AG • Level sensors • Germany • Subject to change without notice
6 Menu overview
Description
Sensor information
Displays the firmware version
Displays the serial number
Displays the status of the container calibration
Initia = Container calibration not carried out
●
Calibr = Container calibration activated
●
Only shown if password entered.
Measuring point designation; can only be written via IO-Link
Parameter describes the quality of the measuring signal.
See chapter „5.6 Evaluating the signal quality"
See chapter „5.6 Evaluating the signal quality"
See chapter „5.6 Evaluating the signal quality"
This function makes it possible to save diagnostic data in the device.
Enter password to access expert mode;
Password 000537 (LFP on the mobile keypad: L=5 / F=3 / P=7)
●
See chapter „5.1 Expert Mode"
EN
Operating instructions
87