Display; Mounting The Coaxial Tube - Sick Lfp Inox Betriebsanleitung

LFP Inox
1 L : Supply voltage, brown
+
2 Q : Analog current-/voltage output, white
A
3 M: Ground, OUT- for current-/voltage output, blue
4 C/Q : Switching output 1, PNP/IO-Link-communication,
1
black
5 Q : Switching output 2, PNP/NPN, grey
2

1.6 Display

All length specifications (in mm) in the menu refer to the end of the probe or in case of activated
function Offset (See chapter "5.10 Setting an Offset") to the tank bottom. You can access the menu
by pressing the Set pushbutton for at least 3 seconds.
Q1 Q2
RUN
1000 mm
Set Esc
Arrow pushbuttons:
Set pushbutton:
Esc pushbutton:

1.7 Mounting the coaxial tube

See operating instruction for coaxial tube 8015674 under www.mysick.com.
8014485/YE12/2014-08-20 © SICK AG • Level sensors • Germany • Subject to change without notice
1 LFP level sensor
2
1
3
5
4
RUN
For navigating in the menu and changing values
For saving and confirming
For exiting the operating menu step-by-step
39,4 in
Set Esc
EN
Operating instructions
63