Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Commissioning and operation
Models TLS-C and TLS-H with M12 coupler connector
PNP transistor output
The supply voltage is DC 24 V.
Load
DC 24 V
5.6 TLS-S settings
Further settings can be made directly at the TLS-S. For this, the case must be opened.
Setting the switching delay
The user can set a switching delay for the switch signal using the 9-position rotary
switch on the left-hand side.
Rotary switch position
0
1
2
3
4
5
6
7
8
9
WIKA operating instructions, models TLS-S, TLS-C, TLS-H
Load
DC 24 V
Switching delay
No switching delay
Switching delay of 1 second
Switching delay of 2 seconds
Switching delay of 3 seconds
Switching delay of 4 seconds
Switching delay of 6 seconds
Switching delay of 8 seconds
Switching delay of 10 seconds
Switching delay of 15 seconds
Switching delay of 20 seconds
SPST relay output
The supply voltage is DC 24 V.
DC 24 V
EN
21
Werbung
