Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Commissioning and operation
Installation in vessels
In the case of horizontal installation, the alignment mark of the vibrating level switch
must point upwards. When installing, ensure that there is sufficient clearance between
the vessel wall and the fork body.
EN
Alignment mark
L
2
If the viscosity range is between 0 ... 2,000 mm
/s, the distance between the fork body
and the vessel wall should be at least 25 mm [0.98 in]. When using a process connec-
tion flange, a minimum nominal width of ≥ DN 50 is recommended.
Alignment mark
WIKA operating instructions, models TLS-S, TLS-C, TLS-H
17
Werbung
