Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Safety
Symbols
EN
2.6 Ex marking
Check whether the classification is suitable for the application. Observe the relevant
national regulations.
Model TLS-S vibrating level switches with Ex db approval may be used in the Ex areas
of zone 0/1. The maximum operating data must be observed!
Instruments with powder coating, plastics or adhesive product labels > 500 mm
metal cases must not be used in areas in which there are processes that generate
strong charges, mechanical grinding or cutting processes, the spraying of electrons,
e.g. in the vicinity of electrostatic painting equipment, or pneumatically conveyed dust
removal occurs.
10
Before mounting and commissioning the instrument, ensure you
read the operating instructions!
Do not dispose of with household waste. Ensure a proper disposal
in accordance with national regulations.
DANGER!
Danger to life from explosion
Non-observance of these instructions and their contents may result in
the loss of explosion protection.
▶
Installation and commissioning of the instrument in accordance with
manufacturer's specifications.
▶
Observe the safety instructions in this chapter and further explosion
protection instructions in these operating instructions.
▶
Observe the information given in the applicable type examination
certificate and the relevant country-specific regulations for installation
and use in hazardous areas (e.g. IEC 60079-14, NEC, CEC).
WIKA operating instructions, models TLS-S, TLS-C, TLS-H
2
on
Werbung
