Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.6. Temperature measurements
Warning!
To avoid electric shock, disconnect both test probes from any
source
of
measurement.
1. If you wish to measure temperature set the function
switch to the °C-range
2. Insert the temperature-probe
to the input sockets V//Hz
(+) and COM (-)
3. Connect temperature probe
to
measurement
Keep the connection until the
reading stabilizes (about 30
seconds).
4. Read the temperature in the
display. The digital reading will indicate the proper
decimal point and value.
Warning!
To avoid electric shock, be sure, that the thermocouple has
been removed before changing to another measurement
function.
6.7. Checking diodes
This function lets you check diodes and other semiconductors
for opens and shorts. It also lets you determine the forward
voltage for diodes.
1. Set the rotary selector to the diode
2. Press select key until diode symbol
voltage
before
object.
making
55
a
temperature
position.
is shown
Werbung
