Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5. Preparation for Operation
5.1. Using the test leads
Use only the identical type of test leads supplied with your
meter. These test leads are rated for 1000V.
Cautions!
*
The maximum rating of your meter is 1000V DC and AC.
If you try to measure voltages above 1000V DC or AC,
you might damage your meter and expose yourself to a
serious shock hazard. Use extreme care when you
measure high voltages.
*
Never connect the probe you plug into the COM terminal
to a source of voltage greater than 1000V DC/AC with
respect to earth/ground. This creates a serious shock
hazard.
5.2. Using the stand
Use your meter's stand to prop up the meter. If you prop your
meter on a bench-top, the stand helps provide a better
viewing angle.
To use the stand as a prop, just open it away from the meter
and set it on a flat surface.
48
Werbung
