Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Electric safety:
*
Voltages over 25 VAC or 60 VDC are generally
considered dangerous voltages.
*
Only work on dangerous voltages by or under the
supervision of qualified personnel.
*
When working on dangerous voltages, wear suitable
protective equipment and observe the relevant safety
rules.
*
Do not exceed the maximum permissible input values
under any circumstances (risk of serious injury and / or
destruction of the device)
*
Pay special attention to the correct connection of the test
leads depending on the measuring function in order to
avoid a short circuit in the device. Never apply a voltage
in parallel to the current sockets (A, mA, µA).
*
Current measurements are always carried out in series
with the consumer, i.e. with the supply line disconnected.
*
Remove the test probes from the measurement object
before changing the measuring function.
*
Never
touch
measurement, only hold the test leads by the handle
behind the finger guard. If applicable, discharge any
capacitors before measuring the circuit to be measured.
*
The thermocouple for temperature measurements is
made of conductive material. To avoid electric shock,
never connect it with a live conductor.
the
bare
test
34
probes
during
the
Werbung
