Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Measurement environment:
*
Avoid any proximity to explosive and flammable
substances, gases and dust. An electric spark could lead
to an explosion or deflagration - danger to life!
*
Do
not
environments, the device could be damaged or contact
points inside and outside the device could corrode.
*
Avoid working in environments with high interference
frequencies, high-energy circuits or strong magnetic
fields, as these can negatively affect the multimeter.
*
Avoid storage and use in extremely cold, humid or hot
environments, as well as long exposure to direct sun.
*
Only use devices in damp or dusty environments in
accordance with their IP protection class.
*
If no IP protection class is specified, only use the device
in dust-free and dry indoor rooms only.
*
When working in damp or outside areas, pay particular
attention to completely dry handles on the test probes.
*
Before starting the measuring operation, the device
should be stabilized at the ambient temperature
(important when transporting from cold to warm rooms
and vice versa)
carry
out
measurements
35
in
corrosive
Werbung
