Werbung
Verfügbare Sprachen
Verfügbare Sprachen
again to keep the smallest reading in the display. If this
reading increases during the measurement again, still the
minimum value remains in the display.
4. Select Key
The Select key is used to switch the different modes. Press
this key in the current and voltage ranges to switch between
AC and DC voltage. Press this key also to switch between
diode and continuity test and the temperature range in °C or
°F. To deactivate APO, hold down the Select button when
switching on.
5. Hold / Backlight Key
The Hold / Backlight key is used to activate the data hold
function by pressing the key once. The current measured
value is retained in the display until the button is pressed
again. Keep the button pressed for a 2 seconds and the
backlight of the LCD display is activated. This turns off
automatically after about 20 seconds.
6. Range Key
The Range button is for manual range selection. The unit has
an auto-ranging, but it can sometimes be useful to select the
measurement range manually. This increases the response
time considerably, since the search for the best measurement
range is omitted. Exceeding the measuring range is displayed
indicating an overflow symbol "OL".
7. REL/USB Key
The relative value measurement function allows the
measurement and display of signals considering to a defined
reference value. Press the REL key 1 x and the displayed
value is set to 0. Wherein a reference value of 100V for
example, and an actual measurement value of 90V, in the
46
Werbung
