Herunterladen Diese Seite drucken

PeakTech 2040 Bedienungsanleitung Seite 36

Digital multimeter

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Maintenance and care:
*
Never use the device if it is not completely closed.
*
Before each use, check the device and its accessories
for damage to the insulation, cracks, kinks and breaks. If
in doubt, do not take any measurements.
*
Change the battery when a battery symbol is displayed
to avoid incorrect readings.
*
Switch off the multimeter before changing batteries or
fuses and also remove all test leads and temperature
probes.
*
Replace defective fuses only with a fuse that
corresponds to the original value. Never short-circuit a
fuse or fuse holder.
*
Charge the battery or change the battery as soon as the
battery symbol lights up. Insufficient battery power can
lead to inaccurate measurement results. Electric shocks
and physical damage can result.
*
If you are not going to use the device for a longer period
of time, remove the battery from the compartment.
*
Have maintenance and repair work on the multimeter
carried out only by qualified specialists.
*
Do not lay the device upside down on the workbench or
work surface to avoid damaging the control elements.
*
Clean the housing regularly with a damp cloth and a mild
cleaning agent. Do not use any caustic abrasives.
*
Do not make any technical changes to the device.
36

Werbung

loading