Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LCD display -010.0V appears. If reference value and
measured value are the same, the digital display shows the
value of "0."
Press and hold the REL / USB button briefly, the data
interface is activated and an RS-232 symbol is shown on the
display. The device cannot transmit any measurement data
without an activated interface.
8. Rotary Seletor
This function selector switch is used to switch between the
different measurement functions. To select the desired
measurement function, turn the switch to the appropriate
position.
9. 10A Input Jack
The 10A jack is used for AC and DC currents up to 10A up
with measurement up to 30 seconds (20 A for 10 sec.) once
every 15 minutes. Connect the red lead for current
measurements with this jack. This range is protected by a
10A fuse against overload.
10. V//Hz/
/ /CAP/TEMP Input Jack
To connect the red test lead for voltage, resistance,
capacitance and frequency measurements, as well as for the
measurement functions diode and continuity tests.
11. mA Input Jack
The mA jack is used for AC and DC currents up to 200mA.
Connect mA current measurements with the red lead to this
terminal. This range is protected by a 200mA fuse against
overload.
12. COM Input Jack
To connect the black test lead (all measurement functions).
47
Werbung
