Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. 4 1/2 digits LCD (19999) with backlight illumination
2. Hz/Duty key for duty cycle measurement
3. MAX/MIN key for minimun/maximum value
4. Select key- function selector button/ Disable APO
5. HOLD / BL key for data hold and backlight
6. RANGE key for manual range selection
7. REL/USB key for relative value and Interface
8. Rotary selector for measurement function
9. 10 A – Input jack
10. V//Hz/
11. mA - Input jack
12. COM - Input jack
4.1 Description
1. LCD display with function indicators
The 4 1/2 digit LCD display is used for digital measurement
display with automatic polarity selection and comma
placement. The maximum display is 19999. The bar graph is
a trend indicator, showing how far the measured value is in
the current measurement range. The function symbols are
chosen automatically depending on range. When exceeding
the measurement range, the overflow indication "OL"
appears. The battery should be replaced promptly when a
battery symbol appears in the left upper corner of the display.
2. Hz / Duty Key
Pressing this button toggles the frequency measurement
function to measure the duty cycle. The display shows the
ratio of high to low pulse in percent.
3. MIN / MAX Key
The Min / Max key is used to activate the minimum or
maximum value holding function. Press the button once to
hold only the highest reading in the display. If this value falls,
still the highest indication remains on the display. Press it
/ /CAP/TEMP - Input jack
45
Werbung
