Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2. Introduction
The new PeakTech 2040 offers a multitude of measurement
functions for electrical measured variables for every user
from industry, craftsmanship, training, hobby and the
laboratory. Particularly noteworthy is the integrated data
interface, which enables this model to record long-term data
in combination with the PC software. It was manufactured
according to the latest development aspects and has a
double-insulated injection-molded housing with rubber
coating, a service flap on the back, through which not only the
battery, but also the high-quality fuses can be replaced. The
device runs on a battery and has an inverted LCD screen with
bar graph. The automatic range selection offers a very user-
friendly operation and measured values can be easily read
on the illuminated display.
The PeakTech 2040 can be used to measure DCV, ACV,
DCA, ACA, resistance, capacitance, diode, continuity,
temperature and frequency, thus creating a wide range of
applications. Due to the high overvoltage category CAT III up
to 1000V, you can use this device safely on electrical
installations and systems.
The following functions simplify the application in daily use:
20000 digits with high basic accuracy
USB Interface for data recording with a PC
HOLD, MIN/MAX, REL, Hz/Duty
Overload and overvoltage protection
Inverted LCD with backlight illumination
Buzzer sounds at continuity tests
Automatic Power Off
38
Werbung
