Before Initial Use; Use Of The Touch Control / Sensor Buttons; Suitable Cookware - Wolkenstein IN4-DA-2FZA+W Bedienungsanleitung

4.1 Before initial use

 Clean the glass-ceramic (look at chap. C
NOTICE! Ensure that the complete packaging material has been removed
before initial operation.

4.2 Use of the touch control / sensor buttons

 The sensor buttons respond to touches, so you do not need to press them.
 Touch the sensors with the bottom side of your top phalanx but not with your
fingertip (see fig. below).
 You will hear a beep after each effective input.
 Always keep the touch control clean and dry. Cooking utensils and cloths should
not cover the touch control. A thin water film may already complicate operating
the sensors.

4.3 Suitable cookware

Use
INDUCTION
the packaging or the base of the cookware.
Check the suitability with a magnet. When the magnet is attracted by the base, the
cookware is suitable.
If you have not got a magnet:
a. pour some water into the cookware which is to be checked.
b. follow the steps described in "
c. when does not flash on the display and the water is heated up, the
cookware is suitable.
The base of cookware must have a minimum diameter relevant to the diameter
of the cooking zone you use the cookware on.
- cookware only. Check the induction symbol on
SUITABLE
HOW TO START COOKING
~
LEANING AND MAINTENANCE
~
98
).
".