Halide-based products.
Products based on hydrogen peroxide.
Hypochlorous acid leaching.
Aggressive products containing acids.
Detergents containing scouring power.
Cleaning products for silver.
Detergents with unknown chemical composition.
Scouring pads or brushes.
Scouring cloths or paper.
Tools used to clean other metals or alloys.
S
PECIAL INSTRUCTIONS FOR APPLIANCES WITH A STAINLESS
To clean stainless steel surfaces, use a non-abrasive stainless-steel cleaning agent
only.
NOTICE! Never use stainless steel cleaner for the direct environment of
the control panel or the control panel itself.
NOTICE! Aggressive detergents such as abrasive detergents, vinegar
cleaners, etc. damage the surface of the extractor fan.
8.3 Grease filter
WARNING! Failure to follow the cleaning instructions will increase the
RISK OF FIRE due to fat deposits.
NOTICE! The colour of the metal surface may change due to frequent
cleaning as well as the use of aggressive detergents. Such changes do
not influence the capacity of the appliance and are no reason for
complaint.
NOTICE! Do not damage the grid of metal-made (aluminium) grease
filters.
NOTICE! Do not operate the appliance without the grease filter installed.
Clean the grease filter r egularly by hand or in a dishwasher (up to 30 °C).
Do not use any acrid or corrosive detergents.
Do not use any abrasive detergents!
Do not use any alkaline dishwasher-detergents! (pH more than 7).
23
Depending on model
~
~
119
-
23
STEEL CASING