How To Stop Cooking - Wolkenstein IN4-DA-2FZA+W Bedienungsanleitung

H
OW TO ACTIVATE THE FLEXIBLE COOKING ZONES
1. Touch the « F
LEX
C.
2. The flexible cooking zone C is now activated, i.e., the two cooking zones A and
B work as a large cooking zone.
3. The power level indicator displays the current power level of flexible cooking
zone C.
4. After you have activated the flexible cooking zone: if no cookware is detected
within 10 minutes, the flexible cooking zone will be deactivated automatically.
You can vary the power level at any time during cooking.
The T can also be used when the flexible cooking zone C is switched on (s.
IMER
also chapter 4.7 H
H
OW TO DEACTIVATE THE FLEXIBLE COOKING ZONES
1. Touch the « F
cooking zone C.
2. The flexible cooking zone C (s. fig. above) is now deactivated, i.e., both cooking
zones A and B now work as separate cooking zones again.
3. The power levels of both cooking zones A and B can now be adjusted individually
again.

4.5 How to stop cooking

 You can switch off the cooking zone in two ways (s. below).
Always switch off the entire appliance (both sides of the hob) using the
« O / O » -
N FF SENSORS
WARNING! Never touch a cooking zone until the residual heat
indicator has switched off (see also chapter 4.5.1 R
). RISK OF BURNS!
INDICATION
. Z » -
ONE ( )
SENSOR
OW TO USE THE TIMER
. Z » -
LEX ONE ( )
.
once to activate the flexible cooking zone
)
once again to deactivate the flexible
SENSOR
~ ~
103
ESIDUAL HEAT