How To Start Cooking - Wolkenstein IN4-DA-2FZA+W Bedienungsanleitung

CAUTION! If the diameter of the used cookware is larger than the
recommended maximum size, the heating time increases as heat
conduction spreads from the centre of the cookware to the edges. In such
a case, the temperature is also unevenly distributed. For these reasons, it
is recommended to comply with the minimum and maximum diameters of
the cookware specified above.

4.4 How to start cooking

WARNING! Never touch the cooking zones until their residual heat
indicators have switched off. RISK OF BURNS!
Caution! Cooking utensils may become hot because of the heat
transferred by the heated food. Potholders or oven gloves may be needed
to handle such utensils.
NOTICE! Only use cookware which is suitable to be used on an induction
hob; otherwise, you will damage the appliance.
 When the power is on, a beep sounds once; all indicators display «
appliance has entered stand - by mode.
Each cooking zone has 9 power levels (1 - 9; setting « 0 »
not heat).
You can set the power levels of the cooking zones individually.
Always set the appliance according to your respective cooking requirements.
1. Touch the « O
display « ». The appliance is in stand - by mode.
2. Place a cookware on the desired cooking zone.
Always keep the bottom of the cookware as well as
the cooking zone clean and dry.
3. If no setting is carried out within 60 seconds, the appliance switches off
automatically. You need to start at step 1 again.
Depending on model.
18
H
OW TO START A COOKING PROCESS
/ O » - . All indicators
N FF SENSOR
~ ~
100
» Now the
= cooking zone does
18