Child Safety Lock - Wolkenstein IN4-DA-2FZA+W Bedienungsanleitung

B
EWARE OF THE POTENTIALLY HOT SURFACES OF THE COOKING ZONES
RISK OF BURNS! The glass may become hot because the cookware may warm
it up. The letter « H » indicates which cooking zones are still hot
disappears as soon as the relevant cooking zone has cooled down. You can use
the residual heat of the cooking zones for saving energy when starting a new
cooking procedure on a cooking zone which is still warm / hot.
WARNING! While the appliance is disconnected from the mains the
residual heat indicator does not work, so the cooking zones may be still
hot. Be very careful!

4.6 Child safety lock

 Your induction hob (both sides of the hob) is equipped with a
.
LOCK
 You can lock the sensors to protect them from unintentional operation or
operation by children.
1. Check that the appliance is switched on. The appliance must
be in -
STAND BY MODE
2. Touch and hold the « L
activate the child safety lock.
3. The indicator of the
indicator of the activated child safety lock: « L
If the timer is set, the indicator displays alternately « L
and the countdown time.
4. All sensors are locked (except the « O
« P » -
AUSE SENSOR
1. Check that the appliance is switched on. The appliance must
be in -
STAND BY MODE
2. Touch and hold the « L
deactivate the child safety lock.
3. The operational status indicator of the child safety lock goes off. All sensors
are released again. Now you can proceed operation as normal.
Depending on model
20
H
OW TO LOCK THE SENSOR BUTTONS
or in
WORKING MODE
» -
OCK SENSOR
displays the operational status
TIMER
.
H
OW TO UNLOCK THE SENSOR BUTTONS
or in
WORKING MODE
» -
OCK SENSOR
~
.
for a few seconds to
».
O
/ O » -, the « L
N FF
.
for a few seconds to
~
105
. The letter « H »
20
CHILD SAFETY
»
O
» - and the
OCK
!