Trouble Shooting: Extractor Fan; Possible Cause - Wolkenstein IN4-DA-2FZA+W Bedienungsanleitung

C
OOKWARE DOES NOT BECOME HOT AND THE RELEVANT SYMBOL IS
 Cookware cannot be detected,
because it is unsuitable, too small or
improperly
cooking zone.
T
HE APPLIANCE OR A COOKING ZONE HAS BEEN SWITCHED OFF
AUTOMATICALLY AND UNEXPECTEDLY
ERROR CODE IS DISPLAYED
 Technical malfunction.
If the appliance has a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the customer service.

9.2 Trouble shooting: extractor fan

POSSIBLE CAUSE

1. The plug of the appliance is not
connected to the socket.
2. The plug has become loose.
3. The socket is not supplied with
energy.
4. The fuse is switched off.
5. The voltage is too low.
1. Ventilation damper blocked.
2. Motor mounting defective.
Depending on model
24
Depending on model
25
DISPLAYED
positioned on
(
24
TYPICALLY ALTERNATING WITH ONE OR TWO
DIGITS ON THE TIMER
MALFUNCTION
T
HE APPLIANCE DOES NOT WORK AT ALL
L
IGHT IS ON BUT MOTOR DOES NOT WORK
.
 Use suitable cookware which meets
the diameter of the cooking zone.
the Place cookware on the centre of the
cooking zone.
,
AN ACOUSTIC SIGNAL SOUNDS AND AN
-
DISPLAY
 Note the complete error-code
disconnect the appliance from the
mains and contact the customer
service.
1. Connect the appliance to the mains
properly.
2. Check the plug.
3. Check the corresponding socket by
connecting it with another appliance.
4. Check the fuse box.
5. Compare the data on the model plate
with the data of your energy supplier.
1. Remove blockage.
2. Replace motor.
~ ~
123
).
MEASURE
:
:
,
25