You can use the T
switch-off of the extractor fan.
Set the desired countdown time with the sliding sensor by swiping your fingertip
over the sliding sensor or by touching the sliding sensor at any point.
While the switch-off time elapses, the set power level can be changed at any time.
While the switch-off time elapses, the extractor fan can be switched off manually
at any time.
When the set switch-off time has elapsed, the extractor fan is switched off
automatically.
6. Environmental protection
6.1 Energy saving: induction hob
Use proper cookware for cooking.
Cookware with thick, flat bases can save up to1/3 of electric energy. Remember
to cover your cookware if possible; otherwise, you will use four times as much
energy!
Match the size of the cookware to the surface of the heating plate. A cookware
should never be smaller than a heating plate.
Ensure that the heating plates and the cookware are clean.
Soils prevent heat-transfer. Repeatedly burnt-on spillages can often be removed
by products, which will damage the environment, only.
Do not uncover the cookware too often (a watched pot-content will never boil!).
Decrease the power level as soon as the desired cooking temperature is reached.
Use pot-lids to shorten cooking times and save energy.
Minimise the amount of cooking liquids or fat/oil to shorten cooking times.
Select a high-power level when you start cooking. Reduce the power level when
your food has been heated up.
For long cooking times: Switch off the cooking zones 5 to 10 minutes before you
will finish cooking. This saves up to 20% of energy.
You can use the residual heat of the cooking zones for saving energy when
starting a new cooking procedure on a cooking zone which is still warm / hot.
to programme a
IMER
~
113
T
IMER
COUNTDOWN TIME
~
for the automatic