Trouble Shooting: Induction Hob - Wolkenstein IN4-DA-2FZA+W Bedienungsanleitung

9.1 Trouble shooting: induction hob

C
 Break in the power supply.
 The sensors are locked.
 Liquid on the sensors.
 You used your fingertip.
 You used unsuitable cookware with
sharp edges.
 You used an unsuitable detergent,
e.g. an abrasive.
S
OME COOKWARE MAKE CRACKING OR CLICKING NOISE
 Your cookware is produced with
layers made of different kinds of
metal.
T
HE APPLIANCE MAKES HUMMING NOISE WHEN USED ON A HIGH HEAT
 Caused by induction-cooking.
N
OISE CAUSED BY THE FAN INSIDE THE APPLIANCE
 The cooling-fan the appliance is
equipped with
electronics from being overheated. It
may continue to run even after you
have switched the appliance off.
AUSES
T
HE APPLIANCE CANNOT BE SWITCHED ON
T
HE SENSORS DO NOT RESPOND
T
HE SENSORS ARE DIFFICULT TO OPERATE
T
HE GLASS CERAMIC IS SCRATCHED
protects
E
RROR
 Check
connected to the mains. Check the
household fuse box. Is there a power
failure at your place of residence?
 Unlock the sensors.
 Dry the sensors.
 Use the bottom of your top phalanx.
 Use suitable cookware.
 Use suitable detergents.
 This is normal for such a cookware
and does not indicate a malfunction.
.
SETTING
 Normal operating condition, but the
noise should decrease or disappear
after decreasing the heat setting.
 Normal operating condition. Do not
the disconnect the appliance from the
mains while the fan is running.
~ ~
122
M
EASURES
.
that the appliance
.
.
.
.
.
is