Wolkenstein IN4-DA-2FZA+W Bedienungsanleitung Seite 101

4. Select a cooking zone using the sensors for the
SELECTION OF THE COOKING ZONES
cooking zone B.
5. The indicator next to the sensor flashes. The
selected cooking zone is activated.
6. Set the desired power level (1 - 9) of the selected
cooking zone using the
adjust the power level in two different ways:
a) Set the power level of the selected cooking zone
using the
SLIDING SENSOR
sliding sensor using your fingertip.
b) Set the power level of the selected cooking zone
by touching the
7. The selected power level is displayed next to the
cooking zone indicator: e.g., « 5 ».
Only one cooking zone is activated: if you do not set a power level within 5
seconds after activating this cooking zone, the induction hob switches off
automatically. You must start at step 1 again.
8. You can vary the power level at any time during cooking.
9. A
FTER THE COOKING PROCESS IS FINISHED
completely using the « O
).
COOKING
SLIDING SENSOR
itself: slide over the
at any point.
SLIDING SENSOR
/ O » -
N FF SENSORS
~
101
: e.g., rear
. You can
: always switch off the appliance
(see also chapter 4.5 H
~
OW TO STOP