ACD GRUPPE MAX BE Kurzanleitung Seite 90

23 Troubleshooting
This chapter informs you how to identify and remedy simple faults or the consequences of incorrect
operation.
If performing the following "Remedies" does not return the mobile workstation to working order, please
contact the manufacturer's customer services department. To help customer services staff to react promptly
and effectively, please have the following information ready:
Serial number of the mobile workstation
•
Message on the display unit
•
Fault description
•
Date of purchase
•
23.1 Unit does not function after switching on
Possible cause
Battery charge too low
Fuses tripped
Plug of the 24 V DC input battery disconnected
Load on the socket strip too high (e. g. laser printer)
23.2 Connected hardware does not function
Possible cause
Plug of the 24 V DC output battery disconnected
Fuses tripped
Residual current device (RCD) tripped.
Load on the socket strip too high (e. g. laser printer)
MAX BE_Kurzanleitung_Brief_Overview_V1.00_de_en
Remedies
Check battery charge status, if necessary charge
battery
Check fuse on the rear panel or on the battery
Check plug on the rear panel
Check the output data of the load (e. g. laser printer)
Observe the maximum load according to the
technical data
Remedies
Check plug on the rear panel
Check fuse on the rear panel or on the battery
Switch on residual current device (RCD)
Check the output data of the load (e. g. laser printer)
Observe the maximum load according to the
technical data
90 / 100