Werbung
ENGLISH
© Enter a volume name.
e You must input a volume name when you select UDF format. When you do not input it, a volume
name is set as "PANA-UDF" automatically.
© Select this when you want to perform physical formatting. (There is no need to do this every time.)
e This mode forces a check of all sectors for defects and allocates detected defective sectors to
the spare area. (Normally this is completed in about an hour.)
The formats you can use with the various Windows operating systems and the free space and
used space after formatting.
There are 4.7 GB of capacity on a side on 4.7 GB and 9.4 GB discs. There are 2.6 GB of capacity on a
side on 2.6 GB and 5.2 GB discs.
This chart shows the free space and used space on one side after formatting.
OS version
rg space shown in parentheses as kilobytes)
Free space
Windows 95
(OSR2 * 3)
Windows NT
Windows 98
4.7 GB
9.4 GB
(one side) |
FaT-32
|
FAT -
| FAT-32
|
4.25 GB **
FAT - 32
231GB
|
X
|
Bi
SS
*8 Windows 95 whose system property is "4.00.950 B" or "4.00.950 C".
Confirm the system property in [Start] — [Settings] — [Control Panel] — [System].
*4 This is the capacity if 4.7 GB/9.4 GB DVD-RAM discs manufactured by Panasonic are formatted
using the formatting software included with this DVD-RAM drive.
2.6 GB
5.2 GB
(one side)
Caution:
e Do not format DVD-RAM discs with the standard formatting software that starts if you
click on [Yes] when the following window appears in Windows 95 or Windows 98.
Formatting
a DVD-RAM disc with the standard format program
included in Windows 95/Windows 98 results in a FAT16 format
IN The disk in dive D isnot fomatted | mat exceeds the 2.0 GB limit, which can interfere with subse-
e Executing Format software on Windows NT
(1) When using the format software, you must login with the user
name that belongs to "Administrator group".
(2) You must close all applications used on a DVD-RAM disc prior
to formatting.
(Continued on the next page)
VOT8697
Werbung
