Werbung
ENGLISH
If the DVD-RAM drive is installed vertically
DR
DVD-RAM discs
© Tray
© Label
@ DVD-RAM
discs
1 Insert so the label-side of the shutter is
facing up.
2 Push the DVD-RAM disc about 2 cm to-
wards the DVD-RAM drive.
3 Press gently on the shutter-label so the
DVD-RAM disc sits firmly on the tray.
Note:
e Do not turn off the computer or remove DVD-RAM discs while the Operation Indicator lamp is
orange. This can destroy data or cause data to be written incorrectly.
e To avoid damage to your discs and this DVD-RAM drive, do not insert more than one disc on a tray.
© Stopper
© Disc holder A
© Disc holder B
© Tray
© Label
© CD, CD-ROM and DVD-ROM discs
You cannot use 8-cm discs if the DVD-RAM drive
is set up vertically, even if you use an adapter.
1 Fold out the stopper.
2 Raise disc holders A and B so they are
higher than the tray.
Insert the disc diagonally between the
stopper and the tray and push it about
1 cm towards the stopper.
Now pull the disc back so it fits between
the tray and disc holders A and B.
Werbung
