Local Video (Dark-Switching); Permanent Access - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH
6.2.2.5

Local Video (Dark-Switching)

Function according to
console (monitor at CATVision-CPU).
6.2.2.6

Permanent Access

Whilst your e. g. configuration you don´t want to be interrupted. Therefor the
remote console (CATVision-CON) as well as for the local console (CATVision-
CPU) has the possibility of activating a permanent access (hold function,
chapter 7.3).
If the permanent access is activated at one console by
computer access for this console is exclusive. If in the entries "Local Video"
and "Remote Video"
the monitors of the blocked consele are additionally switched dark.
The blocked station has access until the function is disabled by the same key
combination.
The function Permanent Access allows the following settings:
BOTH
NONE
LOCAL
REMOTE
The change in setting is done by moving the cursor with the mouse or keyboard
to the entry Permanent Access.
SPACE
With the selection is activated (toggle function)
For saving the settings and closing the menu press F1.
chapter 6.2.2.4 but related to the picture at the local
(see chapters 6.2.2.4 –
Both consoles can activate the permanent access
No console can activate the permanent access
Only the local console (CATVision-CPU) can activate
the permanent access
Only the remote console (CATVision-CON) can
activate the permanent access
page 39
Operating Instructions
CATVision (MC)
CTRL Print
+
6.2.2.5) the setting is Switch Off
see
the