Set Account Defaults; Ivt Access; System Config Access - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH
6.2.3.3

Set Account Defaults

Set Account Defaults
This function sets back all changes of the USER ACCOUNT to the default
values which can be found at the end of a chapter at "default".
Exception: User Name + User Password
Move the cursor to the entry and confirm with ENTER. The function will then be
active in the background.
F1
With you save the new settings and go back to SELECT ACCOUNT.
6.2.3.4

IVT Access

IVT Access:
Here you can give the owner of this account access to IVT or not.
Move to the array and give access to IVT by entering
entering N.
SPACE
can additionally be used for alternative switching.
F1
With you save the new settings and go back to SELECT ACCOUNT.
Default: IVT-Access = Yes
6.2.3.5

System Config Access

System Config Access...
Here you can give the owner of this account access to the menu System
Config or not.
Move to the array and give access to System Config by entering
access by entering N.
SPACE
can additionally be used for alternative switching.
F1
With you save the new settings and go back to SELECT ACCOUNT.
Default: System Config Access = No
Yes/No
Y
or deny access by
No/Yes
page 47
Operating Instructions
CATVision (MC)
Y
or deny