Video Tuning Settings - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH
5.4.4

Video Tuning Settings

After you access IVT, the following settings are available to you in the open IVT
submenu:
 Establishing the video boost.
 Setting the noise filter.
 Fine tuning.
 Delay setting (optional) on the colors R, G, and B of the CAT-x cable.
The IVT submenu appears as follows:
I V T
A c t i v e c h a n n e l : 1
Boost
Noise filter
Fine tuning
delay R
0 ns
ESC: quit IVT menu
F1: save and quit
F3: copy to all channels
1/2/3/4: select channel
F5: auto adjust active channel
F6: auto adjust all channels
ESC: Exits the IVT submenu without saving changes
F1: Saves all changes and closes the IVT submenu
F3: copies all settings to all channels
1/2/3/4 Selecting the video channel (only with CATVision-MC-
Systemen)
F5: Carries out automatic video optimization for the active channel
F6: Carries out automatic video optimization for all channels
You can switch between the individual entries using the
DOWN ARROW
The position of IVT-menu can be placed individual on your monitor with the
HotKey-combination
delay G
keys.
SHIFT+ Cursor.
delay B
0 ns
page 22
Operating Instructions
CATVision (MC)
C V M
4
0
36
0 ns
UP ARROW and/or