Set System Defaults (Supervisor Function); Remote Video (Dark-Switching) - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH

6.2.2.3 Set System Defaults (Supervisor Function)

This function sets back this device to the default condition.
Also the passwords and IVT settings are set back.
The corresponding default settings can be found in the descriptions of the
different menu windows in this documentation.
Move with the cursor control keys to the corresponding menu.
ENTER
By pressing
open.
Info
Confirm again with ENTER. The window will change to the menu FUNCTION.
6.2.2.4

Remote Video (Dark-Switching)

With this setting you define whether the monitor of the remote console at
keyboard or mouse action of the local console either

stays permanently visible or

is switched dark.
The following selections are possible:

ON:

Switch off: Monitor is switched dark at keyboard or mouse action of
For saving the settings and closing the menu press F1.
You can always close this menu by pressing ESC.
the function will be executed and the following window will
This function will delete
all settings.
Press Enter to continue
or
Esc to cancel
Monitor stays permanently visible
the local console.
CVM
page 38
Operating Instructions
CATVision (MC)