Activating The Channel "Display; Setting The Display Position + Colour - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH
6.1.4

Activating the Channel "Display"

With this you have the possibility to set the display of the selected computer or
system informations either to

permanent

temporary
After having moved the cursor to the array DISPLAY you can select your
SPACE
wanted option with
For saving and closing this menu press F1.
If you have selected the temporary setting, the channel display can be called up
anytime by pressing
6.1.5

Setting the Display Position + Colour

Here you set the position and size of the display on the monitor. Move the
cursor to the corresponding entry in the menu CONSOLE SETUP.
After having pressed
display with the cursor control keys or mouse to the wanted position.
+
[Display Position####]
Space: change colour
The modification of the colour of the displayed text is also possible. Press the
space bar to toggle between the different available colours.
ENTER closes the setting and leads you back to the CONSOLE SETUP
(temporary saved).
For saving the setting and closing the CONSOLE SETUP press
(permanently saved).
=> Perm or
=> Temp (disappears approx 5 seconds after switching).
Y
(toggle) or
CTRL CAPSLOCK
+
ENTER
you get to the edit mode and can move the
page 31
Operating Instructions
+ N.
(Default).
CATVision (MC)
F1