Manual Hold Function (Permanent Access); Scroll-Lock - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH
7.3

Manual Hold Function (Permanent Access)

The CATVision system makes it possible that either the local or the remote
console has access to the computer. This prevents that the system enables the
other console after a preset time out of approx 1 second.
CTRL
By pressing
The enabled permantent access is indicated

by the slowly flashing keyboard LED
where the hold function was enabled.

by the fast flashing keyboard LED
ACTIVE LED LOCAL
ACTIVE LED CPU
function.
The display looks like the following:
CVM
PERMANENT ACCESS
The permantent access will be enabled by pressing

SCROLL-LOCK

and the LED
automatic switch (as described in
Notice: If you have activated the double-hotkey
to press the defined double-hotkey for activating the permantent access.
In default the permantent access for both consoles is released. If you
intend to lock the permantent access or only release it for one console
proceed as described in
This function can be combined with the dark-switching-function (see
7.5). In this case the monitor of the inactive console will be dark-switched.
PRINT
and the hold function is enabled.
(e.g. at CATVision-CPU) and the enabled
at the console which was locked by the hold
of the keyboard will be switched off. After this the
chapter
chapter 6.2.2.6.
"Scroll
"Scroll
CTRL
7.2) will be enabled again.
(see chapter
page 54
Operating Instructions
CATVision (MC)
Lock" at the console
Lock", the disabled
PRINT
and again
6.2.2.2) you have
chapter