Fine Tuning; Setting The Run Time Delay Compensation - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH

5.4.4.3.3 Fine Tuning

Fine tuning:
The following keys are available to you for fine tuning:
Key 
Key 
Keys CTRL + 
Keys CTRL + 
Home
End
If you want to make other changes within the IVT submenu, use the
ARROW and/or DOWN ARROW
After establishing the fine tuning setting, confirm and save your selection by
pressing F2 or discard your changes by pressing ESC. In both cases, the IVT
submenu is closed and you return to the FUNCTION menu.

5.4.4.3.4 Setting the Run Time Delay Compensation

delay R
At the CATVision system the run time delay compensation can be set up to 46
ns.
At 0 ns there is no delay compensation.
For compensating the delay the following keys can be used:


CTRL + 
CTRL + 
Example:
If the colour signal
move to the entry delay R and delay this signal until all colours are on top of
Subtracts 1 from the fine tuning value
Adds 1 to the fine tuning value
Subtracts 5 from the fine tuning value
Adds 5 to the fine tuning value
Minimum fine tuning (value: 0)
Maximum fine tuning (value: 575)
keys to move to another entry.
delay G
0 ns
minimizes the delay compensation for 2 ns.
increases the delay compensation for 2 ns.
minimizes the delay compensation for 10 ns.
increases the delay compensation for 10 ns.
red appears too early (red shadow appear left of the letter)
delay B
0 ns
page 26
Operating Instructions
CATVision (MC)
36
UP
0 ns