Guntermann & Drunck GmbH
6.1
Console Setup
F3
in the Function Menu you will get to the Console Setup for the
By pressing
activating console.
C O N S O L E S E T U P
Screen Saver:
Auto Logout:
Console Name:
Display:
Display Position:
Menu Position:
AdonIS by Mouse:
OSD sync:
Keyboard Layout:
Esc
6.1.1
ScreenSaver Settings
The ScreenSaver to be set is started by CATVision and has nothing to do with
the ScreenSaver of the computer.
As in general there is only one indirect connection (via CATVision) between the
computer and the monitor you should switch off the ScreenSaver of the
computers for making work easier.
The ScreenSaver of CATVision takes over this task; it puts the monitor to the
Power-Down Mode.
Move the cursor to the line ScreenSaver. The current entry can be written over
or edited by pressing ENTER.
Valid is a time of 1 - 60 minutes. The entry "0" puts the ScreenSaver to "OFF".
ENTER
completes the entry.
For saving and closing this menu press F1.
Enter
page 29
Operating Instructions
CATVision (MC)
C V M
OFF
OFF
CVM
Temp
...
...
NO
OFF
German
F1:Save