Cv-Power-Expansion; Scope Of Delivery - G&D CATVision Installation Und Bedienung

Guntermann & Drunck GmbH
11

CV-Power-Expansion

By the CV-Power functionality (GPIO=General Purpose Input Output) the
CATVision system offers the possibility of transmitting electronic signals over
long distances.
A correct application for this is the remote control of

RESET and

switching of the ATX power supply
in a PC. With a simple slot-aperture insertion card the current key switches are
combined with the control signals of CATVision.
11.1

Scope of Delivery

For the connection at the CATVision-CPU
 1 x CV power
 2 x 2pole connection cable-0,4
 2 x 2pole connection cable-0,4
 1 x Power Cord-2
For the connection at the CATVision-CON
 1 x 3-pole cable jack
Slot card (ATX module) for the
installation in a PC
for the connection between
motherboard and CV power
(2-core jack/jack)
for the extension of the jack-jack cable
(2-core connector/jack)
Connection cable for connecting the
CV power card with the CATVision
CPU (3pole connector on RJ9 plug)
for the connection at the
key switch connection cable
page 62
Operating Instructions
CATVision (MC)