Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Connecting the device to a WiFi network (WPS)
WPS button
ð The device connects (
ð As soon as the device is connected to the WiFi network, the message
is permanently on.
Connected
Connect your device to the WiFi network via WPS if no barcode scanner is con-
nected to the device and you have access to the router.
1. Ensure that the WiFi function of the device is activated
vating the WiFi
function, page 175.
2. Press the WPS button on the router and on the connection panel of the
weighing platform.
ð The device connects to the router of the WiFi network.
ð As soon as the device is connected to the WiFi network, the
is permanently on.
NOTICE!
Malfunction, incomplete data transmission
Further settings must be made to enable measurement data to be
transmitted to an EMR System via the
► Observe the
) to the router of the WiFi network.
Connecting
seca connect 103
system instructions for use.
seca 103/452
English
è Activating/deacti-
symbol
software.
Configuration • 177
Werbung
