Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Permanently displaying weight and height (Hold)
NOTE
– If the
Autohold
cally displayed permanently as soon as stable measured values have
been achieved
(è Activating Autohold
– If you wish to update measured values (weight and height), press the
display field or press the
Weight
repeated and the updated measured values are displayed perma-
nently.
Device mode
Basic
Advanced
Expert
Service
When the
Hold
function is activated, weight and height continue to be displayed
after the weight has been removed from the scale. This enables you to attend to
the patient before recording the measured results.
✓
There is no load on the scale.
1. Ask the patient to step onto the scale.
2. Wait until height measurement has been completed and, if the device is set
accordingly, the measured results have been announced.
3. Press the
Hold
key.
ð The message
Hold
4. To deactivate the function, press the
ð The
message is no longer displayed.
Hold
NOTE
– When the
Autohold
displayed permanently as soon as a stable measured result has been
achieved
(è Activating Autohold
– If you wish to update the weight, press the
or press the
Hold
updated weight is displayed permanently.
function is activated, weight and height are automati-
function, page 164).
key again. The measurement is
Hold
Function available
appears.
key.
Hold
function is activated, the weight is automatically
function, page 164).
key again. The measurement is repeated and the
English
–
•
•
•
Weight
display field again
Operation • 155
Werbung
