Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Entering waist circumference
6.8
Completing the measurement
Stand-alone operation
158 • seca 655/654; seca 455; seca 257/256/254; seca 453
If the
symbol is visible on the main screen, you can enter the patient's waist
circumference. The waist circumference entry can be configured
BMI/BSA/Waist
circumf., page 167.
1. Press the
display field.
2. Enter the waist circumference.
3. Confirm the entry with the
ð Waist circumference is displayed on the main screen.
To complete a measurement on devices that are not connected to an EMR Sys-
tem or the
seca analytics 125
1. Make sure that the displayed measured values are plausible.
2. Transfer the displayed measured values to the patient file manually.
3. Ask the patient to step off the weighing platform.
4. Press the
key.
ð Measured values and manual entries are discarded.
ð The device is ready for the next measurement.
key.
software, proceed as follows:
è Selecting
Werbung
