Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The machine may only be operated with original parts and
original accessories from the manufacturer. The safety, oper-
ating and maintenance specifications of the manufacturer, as
well as the dimensions specified in the technical data, must be
observed.
Please observe that our equipment was not designed with the
intention of use for commercial or industrial purposes. We as-
sume no guarantee if the equipment is used in commercial or
industrial applications, or for equivalent work.
6. Safety information
General safety information
WARNING: When using power tools, the basic
safety precautions below must be followed in or-
der to reduce the risk of fire, electric shock, and
personal injury.
Please read all instructions before working with
this device.
• Observe all safety information and danger notices on the
machine.
• Ensure that all of the safety and danger notices on the ma-
chine are complete and in legible condition.
• The safety equipment on the machine must not be disassem-
bled or made unusable.
• Check the mains connection cables. Do not use defective
connection cables.
• Check for correct function of the device before commission-
ing.
• The operating personnel must be at least 18 years of age.
Trainees must be at least 16 years of age and may only work
on the machine under supervision. Keep children away from
the concrete mixer.
• Persons under the influence of alcohol, drugs or medication
are not permitted to use the equipment.
• The operator is obligated to wear their personal protective
equipment (PPE).
• Caution when working: Danger of injury due to rotating
parts.
• Only carry out cleaning and maintenance work and rectify
faults when the motor is switched off. Remove the mains plug!
• Installation, repairs and maintenance work on the electrical
equipment may only be carried out by electricians.
• All protective and safety equipment must be reassembled im-
mediately after repair, maintenance is completed.
• Switch off the motor and pull out the mains plug before leav-
ing the work area!
• Ensure adequate lighting. Poor lighting can significantly in-
crease the danger of injury!
• In case of danger, switch the machine off and pull out the
mains plug!
• Never place your hands on moving parts of the machine
when it is switched on. There is a danger of entanglement
due to the rotating drum and rotating mixing tool.
• The machine must not be operated while being moved to
another location!
• The machine may only be positioned on a level surface!
• There is a danger of breathing in toxic vapours and dusts.
Additional safety instructions
• The concrete mixer may only be put into operation fully as-
sembled.
• Check the connection cables for damage before commis-
sioning.
• Wear safety shoes, gloves, safety goggles and a breathing
mask.
• Keep hands and feet away from the moving parts.
• Do not reach into the mixing drum while it is running.
• Do not put any objects into the mixing drum while it is run-
ning, e.g. shovel or similar.
• Danger of injury when the mixing drum is rotating.
• The concrete mixer may only be operated with original
spare parts.
• Repairs to the concrete mixer may only be carried out by
authorised specialist companies.
• Do not leave ready-to-use concrete mixer unattended.
• Switch off the machine and pull out the mains plug when
leaving the workstation.
Residual risks
The machine has been built according to the state-
of-the-art and the recognised technical safety re-
quirements. However, individual residual risks can
arise during operation.
• Danger of injury due to rotating parts.
• Health hazard due to electrical power, with the use of im-
proper electrical connection cables.
• Before performing setting or maintenance work, switch the
motor off and unplug the mains plug.
• Furthermore, despite all precautions having been met, some
non-obvious residual risks may still remain.
• Residual risks can be minimised if the "Safety information"
and the "Proper use" together with the operating manual as
a whole are observed.
• Avoid accidental start-ups of the machine: Make sure that
the ON/OFF switch is set to "0" before inserting the plug
into the socket.
• Use the tool that is recommended in this operating manual.
This is how to ensure that your machine provides optimum
performance.
• Keep your hands away from the work area, when the ma-
chine is in operation.
Warning! This power tool generates an electromagnetic field
during operation. This field can impair active or passive medi-
cal implants under certain conditions.
In order to prevent the risk of serious or deadly injuries, we rec-
ommend that persons with medical implants consult with their
physician and the manufacturer of the medical implant prior to
operating the power tool.
GB/IE
5
Werbung
