Herunterladen Diese Seite drucken

Parkside PCM 62 A1 Originalbetriebsanleitung Seite 10

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 18
2. Introduction
MANUFACTURER:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
We hope your new tool brings you much enjoyment and suc-
cess.
NOTE:
In accordance with the applicable product liability laws, the
manufacturer of this device assumes no liability for damage to
the device or caused by the device arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the electrical
regulations and VDE provisions 0100, DIN 13 / VDE0113
not being observed.
Please consider:
Read through the complete text in the operating manual before
installing and commissioning the device.
The operating manual is intended to help the user to become
familiar with the machine and take advantage of its application
possibilities in accordance with the recommendations.
The operating manual includes important instructions for safe,
proper and economic operation of the device, for avoiding
danger, for minimising repair costs and downtimes, and for
increasing the reliability and extending the service life of the
device.
In addition to the safety instructions in this operating manual,
you must also observe the regulations applicable to the opera-
tion of the device in your country.
Keep the operating manual package with the machine at all
times and store it in a plastic cover to protect it from dirt and
moisture. They must be read and carefully observed by all op-
erating personnel before starting the work.
The device may only be used by personnel who have been
trained to use it and who have been instructed with respect to
the associated hazards. The required minimum age must be
observed.
In addition to the safety instructions in this operating manual
and the separate regulations of your country, the generally
recognised technical rules relating to the operation of such ma-
chines must also be observed.
We accept no liability for accidents or damage that occur due
to a failure to observe this manual and the safety instructions.
4
GB/IE
3. Device description (Fig. 1 + 2)
1.
Pivoting handle
2.
Machine stand
3.
Transport wheels
4.
Motor unit
5.
On/off switch
6.
Drum
7.
Supporting foot
8.
Frame middle section
9.
Foot with wheel axle
10. Drum lower section
11. Bearing support
12. Mixing plant
13. Drum upper section
14. Grating disc
15. Enclosed accessories bag (Fig. 3)
16. belt
4. Scope of delivery (Fig. 3)
• Motor (4)
• Drum upper section (13)
• Bearing support (11)
• Drum lower section (10)
• Enclosed accessories bag (15) (see Fig. 3)
• Mixing plant (12)
• Foot with wheel axle (9)
• Grating disc (14)
• Frame middle section (8)
• Pivoting handle (1)
• Foot (7)
• Transport wheels (3)
• Operating manual
5. Proper use
The concrete mixer can be used for home work to mix concrete
and mortar. The concrete mixer is only intended for private use
in the home and garden.
The machine may only be used in the intended manner. Any
use beyond this is improper. The user/operator, not the manu-
facturer, is responsible for damages or injuries of any type re-
sulting from this.
An element of the intended use is also the observance of the
safety instructions, as well as the assembly instructions and op-
erating information in the operating manual.
Relevant accident prevention regulations and other generally
recognized safety and technical rules must also be observed.
The machine may only be used, maintained or repaired by per-
sons who are familiar with it and have been informed of the
dangers. Any liability of the manufacturer for damages result-
ing from arbitrary changes to the machine is excluded.

Werbung

loading