Herunterladen Diese Seite drucken

Parkside PHDP 180 C2 Originalbetriebsanleitung Seite 36

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
GB
MT
Turbo dirt blaster (22)
The rotating water jet is suitable for
working with low water consump-
tion.
Surface cleaner (24)
Notes
• Only use the surface cleaner on solid
surfaces.
• Never raise the surface cleaner while
the pressure jet is active.
Properties
• Splash-free high-pressure cleaning of
floor and wall surfaces
High degree of cleaning through rotat-
ing nozzles
• Pressure regulator
Control elements
• Pressure regulator (25)
⭮ Higher pressure, spray arms rotate
faster
⭯ Lower pressure, spray arms rotate
slower
Fitting and removing
attachments
Fitting the nozzle
1. Fit the lance (4) on the trigger gun (1)
(Bayonet locking device: plug and
turn).
Pull and hold the quick connector ring
2.
(21) on the lance (4).
Fit the attachment on the lance (4).
3.
4. Release the quick connector ring (21).
The attachment clicks into place.
Removing the nozzle
1. Pull and hold the quick connector ring
(21) on the lance (4).
Pull the attachment off the lance (4).
2.
Release the quick connector ring (21).
3.
4. Remove the lance (4) from the trigger
gun (1) (Bayonet locking device: push,
turn and pull).
36
Mounting the surface cleaner (24)
1. Remove the lance (4) from the trigger
gun (1) (Bayonet locking device: push,
turn and pull).
Optional: Fit the extension tube (7)
2.
on the pivotable connection (26) of
the surface cleaner (Bayonet locking
device: plug and turn).
Fit the extension tube (the pivotable
3.
connection of the surface cleaner) on
the trigger gun (1).
4. Secure the pivotable connection and
the extension tube with the coupling
nuts. The Bayonet locking devices must
not be able to be opened.
Removing the surface cleaner (24)
1. Loosen the coupling nuts on the pivot-
able connection (26) and the extension
tube (7).
Remove the extension tube (the con-
2.
nection of the surface cleaner) from
the trigger gun (1) (Bayonet locking
device: push, turn and pull).
3. Remove the extension tube from the
pivotable connection (26) (Bayonet
locking device: push, turn and pull).
Operation
Cleaning using cleaning
agent
Requirements for the cleaning
agent
• This device has been designed to be
used with a neutral cleaning agent
based on biodegradable anionic sur-
factants.
Use of other cleaning agents or chem-
icals can negatively impact the safety
of the device and can cause dam-
age. Such damage to the device is not
covered by the warranty.

Werbung

loading