Herunterladen Diese Seite drucken

Parkside PHDP 180 C2 Originalbetriebsanleitung Seite 31

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
CABLE BEFORE IT HAS BEEN
DISCONNECTED FROM THE
POWER SUPPLY. Do not use
the device if the cable is dam-
aged or worn.
If the mains connection cable
of this device is damaged, it
must be replaced by the man-
ufacturer, their customer ser-
vice or by a similarly quali-
fied person in order to avoid
hazards. contact the service
centre.
Connect the device only to
a power outlet with a resid-
ual current circuit breaker (FI
switch) of rated residual cur-
rent no more than 30 mA.
Use only extension cords that
are designed for outdoor use.
The connection must be dry
and routed above the ground.
We recommend using a cable
drum that holds the power out-
let at least 60 mm above the
ground.
Extension cables must have a
minimum wire cross section of
2 × 2.5 mm².
High-pressure hoses, fittings
and couplings are important
for device safety. Only use
high-pressure hoses, fittings
and couplings recommended
by the manufacturer.
Do not start the device up if
the mains connection cable,
water supply or other import-
ant parts such as the high-
pressure hose or spray gun
are damaged or leaky.
Only use the device standing
and on a firm, level surface.
Never use the device if
there are children or animals
nearby. People nearby must
wear protective clothing.
Operation
Pay attention, be aware of
what you are doing and take
the utmost care when working
with the device. Do not use
the device if you are tired or
you are under the influence of
drugs, alcohol or medication.
High-pressure jets can be dan-
gerous if used incorrectly. The
jet must not be directed at per-
sons, animals, active electrical
equipment or the device itself.
Do not direct the jet at your-
self or others to clean clothing
or shoes.
If you come into contact with
cleaning agents, rinse them
with sufficient clean water.
Never use the mains connec-
tion cable to pull the plug
out of the outlet or to pull the
GB
MT
31

Werbung

loading