Scheppach ST570 Originalbetriebsanleitung Seite 29

1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new device brings you much enjoy-
ment and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Application other than specified
Note:
Read through the complete text in the operating man-
ual before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your device and to use it for its intended
purpose.
The operating manual includes important instructions
for safe, proper and economic operation of the de-
vice, for avoiding danger, for minimising repair costs
and downtimes, and for increasing the reliability and
extending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual at the device, in a plastic
sleeve, protected from dirt and moisture. They must
be read and carefully observed by all operating per-
sonnel before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description
1. Drive clutch lever
2. Clutch lever of the feed screw
3. Headlamp
4. Gear selector lever
5. Adjustment crank
6. Operating lever for ejection height
7. Ejection cover
8. Belt cover
9. Ejection shaft
10. Skids
11. Shear bolts
12. Scraper bar
13. Feed screw
14. Gearbox housing of the feed screw
15. Shaft cleaning tool
16. Side cutting bars (not included in the scope of de-
livery)
Engine
17. Air filter cover
18. Fuel filler cap
19. Aspirator
20. Choke
21. Fuel valve
22. On/off switch
23. Reverse starter
24. Power cable plug (if so equipped)
25. Electric starter (if so equipped)
26. Electric starter button (if so equipped)
27. Engine oil filler cap with oil dipstick
28. Oil drain screw
3. Scope of delivery
29. Snowblower unit
30. Handlebar with handle
31. Gear selector lever
32. Adjustment crank
33. Switch plate
34. Transport wheels
35. Ejection shaft
36. Shaft cleaning tool
37. Operating manual
38. Enclosed accessories bag
39. Accessory bag fitting
4. Proper use
The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/opera-
tor, not the manufacturer, is responsible for damages
or injuries of any type resulting from this.
The device is intended exclusively for snowblowing.
An element of the intended use is also the observance of
the safety instructions, as well as the assembly instruc-
tions and operating information in the operating manual.
www.scheppach.com
GB | 29