Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Command
SCADA
GSMDATA
GPRSSETTINGS
GPRSDATA
Description
With this status command, it is possible to get information about the SCADA
settings.
Example of reply:
[Installation name]
SCADA code: <access code>
SCADA code: ON
Modbus address: 231
Note: SCADA is subject to access control if another access option than NONE
has been selected.
With this status command, it is possible to get information about the GSM data
counters.
Example of reply:
[Installation name]
SMS sent: 4502
SMS received: 37
Dial-in: 188:22 h
Call-back: 44:09 h
Counter time: 1435:43 h
Counter time in [h:min] since last GSM counter reset.
The counters can be reset with the command RESETGSM.
With this status command, it is possible to get information about the settings of
the GPRS connection.
Example of reply:
[Installation name]
APN: Grundfos.dk2.tdc
MODBUSPORT: 502
GENIPROPORT: 49152
USERNAME: -
PASSWORD: -
AUTHENTICATION: NORMAL
CONNECTION: SERVER
GPRSROAMING: ON
SERVER *): 172.16.2.66
Note: SCADA is subject to access control if another access option than NONE
has been selected.
*) If connection mode is CLIENT.
With this status command, it is possible to get information about the Modbus TCP
status.
Example of reply:
[Installation name]
Packets: 374021
Received: 196684 kb
Sent: 183427 kb
Counter time: 419:51 h>
Packets: The sum of Modbus TCP and GENIpro TCP.
Counter time: The time since the last GPRS counter reset.
The counters can be reset with the command RESETGPRS.
17
Werbung
