Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Command
HEARTBEAT <hour of day>, <day
of week>, ..., <day of week>
Description
When this function is activated, the CIM 25X regularly sends an SMS
in the form of a STATUS1 message to all numbers in the phone
number list. For further information about the STATUS1 message,
see section 3. Status commands.
HEARTBEAT is a CIM 25X configuration command that can be used
to set at which hour of the day and on which weekdays the message
is to be sent.
<hour of day>: OFF, 0, 1, 2, ..., 24.
1 is 1.00 o'clock AM, 12 is noon, and 0 or 24 is midnight.
OFF disables the function.
<day of week>: ALL, MON, TUE, WED, THU, FRI, SAT, SUN.
If ALL is selected, the message will be sent every day. If the hour of
day is set to OFF, the parameter day of week will be ignored and can
be omitted.
Note: It is possible to select more than one specific day if they are
separated by commas.
The CIM 25X will acknowledge the change with this message:
HEARTBEAT: Changed to <hour of day> o'clock on <day
of week>
or
HEARTBEAT: Changed to OFF
Example of command:
HEARTBEAT 12, MON, THU
This command will result in a heartbeat message at 12 o'clock
Monday and Thursday every week.
A heartbeat message contains the same information as a STATUS1
message and will sent to all numbers in the phone number list.
Example of heartbeat message:
[Installation name]
HEARTBEAT:
Device OK
Setpoint: 75 %
Act. setpoint: 6.5 m
Act. value: 6.2 m
START from GSM
CONTROL: Const press
Continued on the next page.
9
Werbung
