Marzocchi BOMBER Z1 COIL Bedienungsanleitung Seite 7

TIRE CLEARANCE TEST
1. Release all air pressure from the fork by depressing the Schrader valve.
Marzocchi forks may contain high air pressures. Release ALL air pressure from the
main air chamber before disassembly. Failure to do so may result in parts or fluids
ejecting from the fork, which can cause SEVERE INJURY OR DEATH.
2. Compress the fork completely.
3. Measure the distance from the edges of the inflated tire to the crown, fork brace, and
steerer. There must be AT LEAST 8.5 mm of clearance around the entire tire.
Failure to leave at least 8.5 mm of clearance between the edges
of the inflated tire and the crown, fork brace, and steerer may
cause the tire to jam against the crown when the fork is fully
compressed, which can result in SEVERE INJURY OR DEATH.
4. Add air pressure to your desired setting using a high-pressure pump. Set the sag
according to instructions online at www.Marzocchi.com.
5. You must repeat this test EVERY time you change tires or rims.
WARNING
Do not exceed maximum air pressure:
BOMBER Z1 and BOMBER 58 maximum
air pressure is 120 psi.
Minimum air pressure is:
40 psi.
Pressure measured at an ambient
temperature of 70-75˚F. Normal
operating temperature range for
Marzocchi products is 20-140˚F.
WARNING
WARNING
8.5 mm <
7
> 8.5 mm